• Comes with debug board, source code of Android2.2 and schematics
• Detachable CPU Board : MINI110
• Samsung Cortex-A8 S5PC110 1GHz with 512KB L2 cache
• 512MB Mobile DDR 400Mega data rate
• 7-inch 800x600 capacitive touch screen display
• 1080p video playback via HDMI output
• WiFi, Bluetooth, GPS
• Accelerometer
• Geo Magnetic field sensor
• Debugging board
• Full hardware schematics
• u-boot 1.3.4, Kernel 2.6.32.9, Android 2.2 (Froyo)
• Android 2.2 BSP in source code
KIT-S5PC110 Evaluation Board is a compact board using S5PC110 microprocessor. It takes full features of this processor and supports 512MB Mobile DDR 400Mega data rate memory. The board has exposed many other hardware interfaces including RS232 serial port, LCD/TSP, HDMI,TF-card interface, keyboard, WiFi, The board boot the system from SD card. It is able to support Android OS and provided the sourece code for the Linux2.6.32.9 BSP and Android 2.2(Froyo).
KIT-S5PC110 Evaluation Kit includes the KIT-S5PC110 evaluation board, CPU Board and all necessary accessories to help users start their design of multimedia applications. The board is preloaded with Android OS in SD card. User can display the subsystem using a 7" TFT LCD and Touch screen. Along with the kit, Boardcon provides user manual, schematic drawing, Debugging board and datasheet documents to help customers better understand and use the kit.
KIT-S5PC110 full view:
• Processor: Samsung S5PC110 Cortex-A8 1Ghz with 512KB L2 cache, 3D Accelerator | SGX540 (up to 20M triangles/s and 1000M pixels/s)
• Memory: 512MB Mobile DDR 400Mega data rate
• MicroSD Card Slot: 4Gbyte T-flash(removable) memory card for system area of Boot Loader, Kernel and Android and user storage
• PMIC: contains 3 Step-down DC/DCs and 9 LODs.
• Display: 7 inch, 800*480 RGB interface with capacitive multi-touch screen.
• Mini HDMI : Standard type-C HDTV, support up to 1920 *1080 resolution
• Video: supports 1080p via HDMI cable (H.264+AAC based MP4 container format)
• Video Out | mini-HDMI connector with SPDIF audio
• Audio: Built-in speaker and microphone, standard 3.5mm headphone jack
• I/O: USB 2.0 HS Device for ADB/Mass storage, UART/JTAG for development
• DC Jack: 5V 2A power
• USB: USB2.0 HS Host(Standard A type connector)
• WiFi: 802.11 b/g/n(Broadcom BCM4329)
• Bluetooth: 2.1 + EDR
• GPS: Built-in non-directional antenna
• Camera: 5 Mega pixel autofocus(conditionally 2Mega pixel accessible)
• Other Features: 3-axis accelerometer, Geo magnetic field sensor, Linear motor
• System Software: u-boot 1.3.4, Kernel 2.6.32.9, Android 2.2(Froyo)
• Battery: MAX17040 chip, 5600 mAh rechargeable Lithium Polymer
• Dimensions: 220x121x13mm
• Weight: 430g(with battery)
DEBUG BOARD
• TTA20-Male Connector: Connect to I/O port.
• RS232C Serial Port: Connect to Host PC RS232C Serial Port via cable.
• Mini-B USB Connector: Connect to host PC.
• 64-bit Multi-layer bus architecture
• Advanced power management for mobile applications
• ROM for secure booting and RAM for security function
• 8-bit ITU 601/656 Camera Interface up to 8M pixel for scaled and 16M pixel for un-scaled resolution
• Multi Format CODEC provides encoding and decoding of MPEG-4/H.263/H.264up to 30fps@HD(1080p) and
decoding of MPEG-2/VC1/Divx/Xvid video up to 30fps@HD(1080p)
• JPEG codec support up to 30Mpixels/s
• 3D Graphics Acceleration with Programmable Shaderup to 10M triangles/s (Transform only)
• 2D Graphics Acceleration with BitBlitand Rotation, up to 40Mpixels/s
• 1/2/4/8 bpppalletized or 8/16/24bpp non-palletized Color-TFT support up to 2048x2048
• TV-out for NTSC and PAL mode and HDMI 1.2 interface support with PHY
• MIPI-HSI, MIPI-DSI and MIPI-CSI interface support
• 1-channel AC-97 audio codec interface, 2-ch PCM serial audio interface, and 3-channel 24-bit
I2Sinterface support (5.1ch support)
• 2-channel S/PDIF interface support for digital audio
• 2-channel I2C interface (up to 400KHz) support including 1-channel for HDMI
• 3-channel HS-SPI, up to 52Mbps
• 4-channel UART including 4Mbps port for Bluetooth 2.0 and IrDA port for SIR/MIR/FIR
• On-chip USB 2.0 OTG supporting high speed (480Mbps, on-chip transceiver)
• On-chip USB 1.1 Host supporting full speed (12Mbps, on-chip transceiver)
• Asynchronous direct Modem Interface support including 16KB DPRAM
• CF version 3.0 interface support for HDD
• 24-channel DMA controller
• Support 8x8 key matrix
• 10-ch 12-bit multiplexed ADC
• 2-ch CAN interface
• Configurable GPIOs
• Real time clock, PLL, timer with PWM and watch dog timer
• SRAM/ROM/NOR/NAND Interface with x8 or x16 data bus
• MuxedOneNANDInterface with x16 data bus
• 1-port Mobile DDR Interface with x32 data bus (up to 333Mbps/pin DDR)
• 1-port DDR2 interface with x16 or x32 data bus (333Mbps/pin DDR)
• 1-port LPDDR2 interface (up to 333Mbps/pin DDR)
• 1 KIT-S5PC110 board
• 1 Debug board
• 1 USB cable
• 1 Battery
• 1 Schematics and the Android 2.2 source code
• 4GB MicroSD card
|
