EM2416 Development Board offers true rapid development solutions by providing all the necessary ingredients to jump start embedded designs BOARDCON

EM2416 Development Board offers true rapid development solutions by providing all the necessary ingredients to jump start embedded designs. The board includes the MINI2416-III SOM and Carrier Board pre-installed Linux OS. The mother board integrates a rich set of peripherals and interfaces including Ethernet, USB Host &Device, Serial ports, Audio, LCD, Keyboard, SD/MMC, Buttons, LEDs and etc. The board has complete electronic documentation, schematics, demo applications, and third party industry-standard C compilers and embedded development environments for evaluation.

Boardcon also backs up our kits with a Start-Up Guarantee. We invite you to make use of our free technical support until any start-up problem you might encounter is solved. The positive out-of-box experience with the Rapid Development Kit illustrates Boardcon's continuous commitment to providing customers with effective embedded solutions by offering a hands-on, industry-centric entry point for embedded developments, which is a key starting point for OEMs needing to have a complete solution up and running under very short development time constraints.

If somewhere on the board don't meet your specification of your project, we will modify the board for a semi-custom solution. When needed, we will develop a new embedded SBC or peripheral board to meet your requirements. Depending on the design agreement, you might maintain sole ownership of the final product, or we might add the product to our COTS product line.

Feature	Specifications
CPU	Samsung ARM9 S3C2416X 400MHz with separate 16KB instruction and 16KB data caches, 2D Accelerator
SDRAM	64MB DDR2 RAM,133MHz, 32bit, Samsung K4T51163QE-ZCD5, it can be replaced into 128MB immediately
NAND Flash	Default mounted 256MB, Samsung K2F2G08. It can be replaced into among 256MB to 2GB immediately
Power	3.3V power supply for CPU board
Connector	DC-2.0mm pitch board-to-board connectors
Dimension	37mmx74mm

Feature	Specifications
Serial Ports (UARTs)	COM-0 - RS232, five-wire DB9 RS232 serial port COM-1 - RS232, three-wire available via 2mm pitch 3 pins COM-2 - RS232, three-wire available via 2mm pitch 3 pins
LCD	The LCD port integrated 4-wire resistor touch screen port. The board comes with driver for 4.3" and 7" TFT LCD (the resolution is 800*600)
Ethernet	Davicom DM9000A MAC & PHY, 10/100BaseT, Activity LED's
USB	USB1 Host, 12 Mbps ,USB2 Device,12 Mbps
JTAG	1 X 2mm pitch 20 pins JTAG Port
Keyboard & mouse	USB, keypad is working via USB
Audio codec	Adopt UDA8731 Audio chip, Audio input and output slot
ADC	Adjustable resistor is connected with pins of ADC to check analog/digital change
RTC	Real Time Clock, powered by external lithium battery
Buzzer	On-board PWM function test unit
Device support	1 x SD/MMC card socket, Supports Multimedia Card, Secure Digital and Secure Digital I/O communications protocols up to 2GB
General Purpose I/O	A 40-pin GPIO Expansion Connector
BUS	A 40-pin BUS extended interface
LED	4 x Status LED
Buttons	4 Programmable User Buttons
Dimension	105mmx128mm

OS	Feature	Description
Linux2.6.21	Bootloader	u-boot 1.3.4 1. Supporting Nand Flash erase/write/read 2. Supporting set, save Environment Variables 4. Supporting SD Card boot-up(replace JTAG) 5. Supporting bootm, bootargs setting
	Kernel and drivers	Kernel: linux2.6.21 drivers: Serial ports, RTC, LCD, Touch Screen, SD card, Audio, Nand flash, WIFI, GSM/GPRS, GPS, supporting update image from SD
	File system	Yaffs File System, busybox, Provided Lib(ALSA-lib, tslib, glibc), udey support
	Embedded GUI	Qtopia2.2.0
	Cross complier Environment	Cross-4.2.2-eabi

Copyright @2006 - Boardcon, Inc. Tel: +86-755-26481393 MSN:Boardcon@hotmail.com Email:Market@armdesigner.com www.boardcon.com