• CPU: Samsung ARM926EJS S3C2416,400MHz industrial frequency
• 64MB&128MB DDR2 SDRAM
• 64MB¡«1GB Nand Flash
• Support 4 RJ11 Serial Ports,1 RS232 DB9 serial port
• 1 SD 2.0 and 1-way MMC4.0
• Support booting from Nand flash and SD
• One 10/100M Ethernet interface
• 1 TFT-LCD(VGA)interface, support 1024*768 resolution
• 1 USB device interface and 2 USB HOST interface, Support USB mouse, USB keyboard and USB to Serial
• support GPRS/GSM,WIFI and GPS
S3C2416 ARM9 is designed by SAMSUNG in the second half of year 2008, which can take the place of S3C2440A perfectly. It is with main frequency of 400MHz, and it contains 2D graphics acceleration video card which supports common graphics acceleration function such as DirectDraw and GDI. The maximum resolution of the video card is up to 1024*1024 pixels. And S3C2416 ARM9 also has the following functions: supporting USB2.0 high-speed interface, SD/MMC2.0 protocol interface, high-speed SPI interface protocol (the maximum speed is 50Mbps), and so on. In addition, S3C2416 supports a variety of startup modes, such as SD card, USB, OneNand, Norflash and Nandflash, so it greatly accelerates the debugging and development of the upper applications and underlying drivers.
EM2416-I is a high cost-effective development board which is based on samsung S3C2416.It implements all the features of S3C2416, and it is designed specifically for business users who develop consumer electronics, industrial control, vehicle navigation, PDA and other electronic products.
|
Feature |
Desciption |
|
CPU |
Samsung ARM926EJS S3C2416 400MHz, contains 2D graphics acceleration video card |
|
memory |
64MB&128MB DDR2 |
|
NAND Flash |
64MB¡«1GB Nand Flash |
|
Serial port |
4 RJ11 serial Ports,1 Debugging serial port |
|
GSM/GPRS |
Support standard AT command set |
|
LCD |
Support 3.5 inch,4.3 inch,7 inch LCD, support 1024*768 resolution |
|
Audio codec |
Use WM8731 chip for audio codec |
|
RTC |
Support RTC with calendar function |
|
SD card |
support booting from SD, SD card read & write |
|
WIFI |
802.11 b/g/n |
|
GSM/GPRS |
Support GSM cards make calls,send messages, and support for GPRS wireless Internet access dial-up |
|
GPS |
GPS navigation |
|
Ethernet |
10M/100Mb Ethernet |
|
LED&DIP switch |
8 LEDs and 8-DIP switche |
| USB |
1 USB Host1.1*2, 1 USB Device |
|
Others |
1 GPIO that is used to Extended 10 I/O and 3 ADC input |
|
Core board dimension |
37mm¡Á74mm |
|
Carrier board dimension |
123mm¡Á177mm |
|
OS |
Feature |
Description |
|
Linux2.6.21 |
Bootloader |
u-boot 1.3.4
1. Supporting Nand Flash erase/write/read
2. Supporting set, save Environment Variables
4. Supporting SD Card boot-up(replace JTAG)
5. Supporting bootm, bootargs setting |
|
Kernel and drivers |
Kernel: linux2.6.21
drivers:
Serial ports, RTC, LCD, Touch Screen, SD card, Audio, Nand flash, WIFI, GSM/GPRS, GPS, supporting update image from SD |
|
File system |
Yaffs File System, busybox, Provided Lib(ALSA-lib, tslib,glibc), udey support |
|
Embedded GUI |
Qtopia2.2.0 |
|
Cross complier Environment |
Cross-4.2.2-eabi | 
 |
