• Processor: Samsung ARM Cortex-A8 S5PV210AH, up to 1GHz
• Memory: 512MB DDR2
• Flash: 256MB SLC NAND Flash
• Supporting 2D graphics acceleration, up to 160Mpixels/s, maximum resolution 8000*8000
• Supporting 3D graphics acceleration(Power VR SGX540)
• Monolithic integrated power management chip
• Supporting both resistive touchscreen and capacitive touchscreen
• One Key to update Boot-loader, Kernel, Yaffs and one Key to configure parameters of
Linux
• Supporting GPS, WCDMA, Camera, USB 3G, WIFI Modules
• 3.2Mega pixels Camera
• Supporting Cramfs/ramfs/etx2/fat32/nfs/yaffs
• System parameters can be saved in REGEDIT, and residual Flash can be read and written
• The system can be updated via USB interface.
• Supporting Linux 2.6.32 and Android 2.3
• Dimensions: Carrier board-108mm×141mm; CPU board- 60mm×60mm
Boardcon's EM210 integrates a high-performance, low-power 1GHz Samsung ARM Cortex-A8 S5PV210AH with Samsung K4T1G64QF chipsets and Samsung K9F2G08, delivering
best performance-per-watt for communication, healthcare, automation, transportation,
multimedia advertisment, high performance POS machine, and surveillance applications.
The compact EM210 offers a rich set of peripherals and interfaces including Ethernet, USB
Host &OTG, Camera, HDMI, Serial ports, Audio, LCD, Keypad, T-Flash, Buttons and etc.
The EM210 brings a flexible array of communications options including Wi-Fi, WCDMA
and a variety of 3G. A SIM card slot is also included. Supporting two OS - Linux 2.6.32
and Android 2.3, the EM210 can deliver a variety of features and APIs that allow developers
to highly customize their system designs in the low-profile and fully-configured embedded
devices.
The board has complete electronic documentation, schematics, demo applications, and third
party industry-standard C compilers and embedded development environments for evaluation. We are sure to have the right single board computer for your applications.
|
Feature |
Specifications |
|
CPU |
Samsung ARM Cortex-A8 S5PV210AH, 1GHz System Clock
Supporting NEON instruction
Supporting MPEG-4, MPEG2, H.264/H263, VC-1 and DivX video codec
Supporting 2D graphics acceleration, maximum resolution 8000*8000
Supporting 3D graphics acceleration(Power VR SGX540) |
|
Memory |
Default mounted 256MB DDR2 |
|
NAND Flash |
Samsung K9F2G08, 256MB SLC NAND Flash |
|
Power |
5V power supply for CPU board |
|
CPU Dimension |
60mm×60mm |
|
Serial Ports
(UARTs) |
COM-0, five-wire DB9 RS232 serial port
COM-1, four-wire RJ11 serial port
COM-2, four-wire RJ11 serial port |
|
LCD |
The LCD port integrated 4-wire resistor touch screen port. The board comes with driver for 4.3", 7", 15"(1024*768) TFT LCD |
|
Ethernet |
10M/100M High performance Ethernet, RJ45 interface |
|
USB |
1 × USB Host2.0*2, 1 × USB2.0 OTG |
|
Camera |
1 × 20-pin 320Megapixels CMOS camera interface |
|
JTAG |
1 × 10-pin JTAG Port |
|
Mouse |
Mouse working via USB |
|
Keyboard |
6*7 Keypad interface |
|
Audio codec |
Adopt WM9713 Audio chip, Audio I / O interface |
|
RTC |
Real Time Clock, powered by external lithium battery |
|
SD card |
1 × T-Flash card, 1 × SIM card slot |
|
General Purpose I/O |
1 × 30-pin SPI Expansion Connector |
|
Buttons |
6 Programmable User Buttons |
|
WIFI |
802.11 b/g/n |
|
WCDMA |
Supporting GSM card make calls, send messages |
|
GPS |
Built-in non-directional antenna |
|
Carrier board
Dimension |
108mm×141mm |
|
OS |
Item |
Feature |
Description |
|
Linux2.6.32 |
Bootloader |
Boot |
Start up system, supporting one Key to update Bootloader, Kernel, Yaffs, and one Key to configure parameters of Linux. Also can be configured the board booting from Yaffs or NFS |
|
Tftp |
Support tftp transmitting protocol |
|
File system |
Yaffs |
|
Kernel |
Support writing kernel image into nand flash and kernel parameter setting |
|
Etc. |
Support via USB and Serial Interface to download application to flash debug |
|
Kernel |
Version |
Linux kernel 2.6.32 |
|
File system |
CRAMFS/RAMFS/EXT2/FAT32/NFS/YAFFS/YAFFS2 |
|
Serial |
serial driver |
|
10/100M Ethernet |
DM9000 |
|
RTC |
RTC driver |
|
USB Host |
USB Host, USB Slave driver |
|
Buttons |
User buttons |
|
LCD |
Coming with driver for 4.3", 7",15" TFT LCD |
|
Touch panel |
Touch panel driver |
|
SD card |
SD card driver |
|
Sound |
WM9713 |
|
Camera |
CMOS/CCS Camera driver |
|
USB Camera |
The chip of USB Camera is Vimicro 301p, the USB Camera is collecting dynamic picture and showing on the LCD |
|
WCDMA Module |
Using WCDMA Module to dial-up to Ethernet |
|
Embedded GUI |
Qt/Embedded |
Qtopia 2.2.0 and Qtopia 4.7.3 |
|
Application |
Servfox |
The application is running under Console platform, it controls the USB Camera by internet and displays the picture taken by camera on the LCD. It can be taken as net monitor when the application works with USB Camera. |
|
Spcacat |
It is a camera picture capture application under Console platform |
|
Snapshot |
It is a LCD picture capture application under Console platform |
|
Rz and sz |
It is a application that transfer and receive file by serial port |
|
Madplay |
It is a MP3 player |
|
Network protocol |
TCP/IP |
TCP/IP protocol |
|
Telnet |
Telnet server, telnet remote login |
|
File transfer |
FTP Client/server |
|
Web server |
BOA Web Server |
|
USB port supported Devices |
U-disk, portable hard-disk, USB mouse, USB Keyboard, USB HUB, USB Camera and so on. |
|
Command commands |
cat, chmod, discard, echo, flashsd, flashwrite, free, genhtml, hostname, init, kill, loader, ls,mkdir, mount, ps, reboot, rm, smanaged, sysconf, yes, insmod, lsmod, rmmod |
|
Tools |
busybox1.13 (provided in the CD-ROM) |
|
OS |
Item |
Feature |
Description |
|
Android2.3 |
Bootloader |
Uboot-1.3.4 |
Main functions:
1.Supporting Nand Flash erase/write/read
2.Supporting USB download Image
3.Supporting print, set, save Environment Variables
4.Supporting memory's contents display/compare/modify
5.Supporting bootm, bootargs setting |
|
USB Installer.bin |
Uboot boot process, download uboot by the process |
|
Image update |
Support updating image from SD card or USB |
|
Kernel and drivers |
Kernel version |
Linux 2.6.35 |
|
Drivers
(source code) |
Serial ports, RTC, 4.3", 7", 15" LCD including Touch Screen, SD, USB Host, USB OTG, LEDs, AC97, Keyboard, 3-axis accelerometer, VGA, PWM, IIC, IIS, SPI, MFC, TVOUT, HDMI, JPEG, WIFI, WCDMA, GPS, DM9000 |
|
File System |
File System |
Yaffs File System |
|
Embedded GUI |
Android2.3 |
Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager. |
|
Network protocol
& application |
Network Protocol |
TCP/IP protocol, Telnet, FTP Client/server, boa web server |
|
Application |
Alarm Clock, Bluetooth chat, Browser, Gallery, Calculator, Camera, Phons, Email, Maps, ES File Explorer, Mediaplayer, Music, Picsay, ASTRO, Gallery, |
|
Cross compiler Environment |
Arm-2009q3.tar.bz2, JDK1.6 |
|
Debug Tools |
DNW, MoviNAND_Fusing_Tool.exe, VmWare7.0 |
• EM210 Single board computer
• One CD-ROM ( Linux BSP, Android BSP, Documents, tools, Schematic Drawing, datasheets)
• One Ethernet cable
• One Serial Cable
• One USB Cable
• 5V/2A DC Power adapter
|
