|
• Processor: ARM11 Samsung S3C6410, ARM1176JZF-S core, Main frequency 533MHz/667MHz
• Two pieces 64M Bytes mDDR RAM, low power consumption mobile DDR
• 256M bytes NAND Flash
• 2M Bytes NOR Flash
• Two high speed SD card interface
• Two 20-pin SPI interface, it can connect WIFI, DTV Module
• Four UARTs, select the RS232 level output or TTL level output by adjusting the digital switch
• Two kinds of LCD/Touch Screen interface. Supporting 3.5 inch TFT LCD, 4.3 inch TFT LCD and 7 inch TFT LCD
• Many modules are available for your choice - GPS, WIFI, Camera, 3G Modem, USB HUB and Matrix Keyboard Module
• WinCE6.0, Linux2.6.28, Android2.3 and Ubuntu are available for the Kit
The Android kit is based on ARM11 Samsung S3C6410 which provides a standard set of on-board peripherals. Combined with 128MB mDDR RAM, 256MB NandFlash, 10/100M Ethernet controller and a power management controller (PMIC), the KIT offers a powerful solution for many embedded applications ¨C wireless communication, navigation, medical devices, industrial automation controllers etc.
The Android kit has exposed many peripherals, such as serial port, LCD/TSP, TVOUT, S-Video, Ethernet, GPIO, camera, SPI and JTAG. Besides, two high speed SD card sockets and two camera interfaces (one is dual in line Pin connector, the other one is FPC connector) are included. The kit runs not only WinCE6.0, Linux2.6 and Ubuntu, but also Android2.3. It has enabled almost all and the latest features of Android such as 3G Networking, WIFI, GPS.
With ARM11 Samsung S3C6410 chipset, well architecture and multiple operating systems supported, the Android kit offers fast time-to-market with reduced development cost and significant freedom in meeting form-fit-function requirements. In the meanwhile, this development board presents fine performance, low power consumption, and optimized integrated graphics for a wide range of embedded markets.
|
Feature |
Desciption |
|
CPU |
ARM11 Samsung S3C6410, ARM1176JZF-S core, Main frequency 533MHz/667MHz |
|
RAM |
Two pieces 64M Bytes mDDR RAM, low power consumption mobile DDR |
|
NAND Flash |
256M bytes NAND Flash |
|
NOR Flash |
2M Bytes NOR Flash |
|
CPU Dimension |
81.2mm¡Á55.8mm |
|
Serial Ports
(UARTs) |
4 serial ports (Two are five-wire RS-232 DB9 interface, another two are three-wire TTL serial port led out from a 20-pin expansion connector) |
|
LCD |
Two kinds of LCD/Touch Screen interface. Supporting 3.5 inch TFT LCD, 4.3 inch TFT LCD and 7 inch TFT LCD |
|
Ethernet |
10/100M Ethernet interface (RJ45) |
|
USB |
1¡ÁUSB OTG2.0 port (Mini USB type interface)
1¡ÁUSB HOST1.1 |
|
Camera |
Two camera interfaces (30-pin FPC connector, support CCD or CMOS camera) |
|
JTAG |
1¡Á20-pin JTAG interface
1¡Á10-pin CPLD JTAG interface |
|
SPI |
2¡Á20-pin SPI interface, it can connect WIFI,DTV Module |
|
GPIO |
1¡Á50-Pin GPIO connector |
|
BUS |
1¡Á50-Pin data and address BUS connector |
|
Audio codec |
2-channel audio output interface (3.5mm audio jack) |
|
TVOUT |
1 TVOUT |
|
VGA |
1 VGA interface |
|
S-Video |
1 S-Video display interface |
|
RTC |
1 RTC Real time clock |
|
SD card |
SD/MMC interface (supports 3.3V and 1.8V logic voltage) |
|
Buttons&Switch |
7 Buttons (Reset, User definedf)
1 Power switch
1 Boot switch |
|
Power |
+12V |
|
Carrier board
Dimension |
200mm¡Á140mm |
|
OS |
Item |
Feature |
Description |
|
Linux2.6 |
Bootloader |
u-boot |
Main functions:
1. Supporting Nand Flash erase/write/read
2. Supporting USB download Image
3. Supporting print, set, save Environment Variables
4. Supporting memory's contents display/compare/modify
5. Supporting bootm, bootargs setting |
|
Sdboot |
1. SD Card boot-up and download Image via USB (can replace JTAG)
2. Replace booting LOGO |
|
Image update |
Supporting Image update from SD Card or USB |
|
Kernel and drivers |
Version |
Linux 2.6.28 |
|
File system Format |
ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS |
|
Drivers |
Serial ports, RTC, Ethernet, 3.5", 4.3", 7" , 10.2" LCD and 10.4"(LVDS) including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, GPS, High Speed SD card, USB Keyboard and Mouse,VGA, IIC, SPI, DMA, MFC, TVOUT, OpenGLES1.1&2.0, D3DM |
|
File System |
File System |
Yaffs or NFS File System |
|
Function |
Provided Lib (ALSA -lib, tslib, glibc), udev support |
|
Embedded GUI |
Qtopia 2.2.0 |
Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager |
|
Network protocol
& application |
Network protocol |
TCP/IP protocol, Telnet, FTP Client/server, Boa webserver |
|
Application |
H.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUT |
|
Cross compiler Environment |
3.3.2 , 3.4.1 , 4.2.2-eabi |
|
WinCE6.0 |
Boot |
Eboot |
Start eboot from SD card, do not burn eboot via JTAG |
|
Boot Mode |
Boot WinCE from SD card, NAND Flash |
|
Image update |
Support updating image from SD card or USB |
|
System |
Characteristic |
KITL kernel debug, Reboot, Watchdog, RTC |
|
Drivers |
3.5", 4.3", 7" LCD including Touch Screen, VGA, TVOUT,S-Video LEDs |
|
SD card, High speed SD card, SPI, AC97, Camera, Ethernet, USB Host, USB OTG, Serial ports, RTC,GPS, WIFI,3G Module, IIC, JPEG, CF_ATA, CMM, DMA, DrvLib, MFC, POWERBUTTON, POWERCONTROL, UA0 |
|
Function |
220MB NAND Flash for user |
|
Power Management (backlight drive, battery-driven, sleep/wake-up function), Hive registry support, ROM file system support |
|
Hive registry support |
|
ROM file system support |
|
|
Software features |
Source code and test program for MPC, MPEG-4/H264/H263/VC-1, DirectorShow Filter, JPEG, OpenGL ES1.1 & 2.0 |
|
TCPMP Media Player supports MPEG-4/H263/H264/VC-1, avi/mp4/m4v, mov/3gp/flv/mpg, DIVX/XVID, supporting Audio decoding MP1/MP2/MP3/AC3/AAC |
|
Many Message Tools-Skypem, MSN, QQ, OFFICE Tools-Word, Excel, PoewrPoint, PDF, txt |
|
.NET Compact Framework 3.5 |
|
Android2.3 |
Boot |
Version |
U-boot 1.3.4 |
|
Boot Mode |
Boot Android from SD card, NAND Flash |
|
Image update |
Support updating image from SD card or USB |
|
Kernel and driver |
Version |
Linux 2.6.36-Android |
|
Drivers |
SDROM, Flash, Serial ports, RTC,4.3" and 7" LCD including Touch Screen, MMD/SD, High Speed SD card, user buttons, IIC, SPI, JPEG, MFC, TVOUT, LCD display rotate, USB Host, USB Device, 2D/3D,Hardware decode, OpenGLES1.1 & 2.0, D3DM |
|
File System |
File System Format |
Yaffs2 (Androidfs-sdk-m5-rc15) |
|
Embedded GUI |
Android-2.3 |
Support file browser, Mediaplayer |
|
|
Application |
Alarm Clock, ASTR0, Mediaplayer, Music, Picsay, Gallery, Browser, Panda Reader |
|
Cross compiler Environment |
Arm-none-linux-gnueabi |
|
Debug Tools |
DNW, MoviNAND_Fusing_Tool.exe |
|
Ubuntu |
Boot |
Version |
U-boot 1.1.6 |
|
Boot Mode |
Boot Android from SD card, NAND Flash |
|
Image update |
Support updating image from SD card or USB |
|
Kernel and drivers |
Version |
Linux 2.6.29 |
|
Drivers |
SDROM, Flash, Serial ports, RTC, 4.3" and 7" LCD including Touch Screen, MMD/SD, High Speed SD card, user buttons |
|
File System |
File System Format |
Ext3 rootfs |
|
Embedded GUI |
Lxde-ubuntu |
Support file browser, Mediaplayer |
|
Cross compiler Environment |
Arm-none-linux-gnueabi |
|
Debug Tools |
DNW, MoviNAND_Fusing_Tool.exe |
One ARM11 Android kit Evaluation board
One CD-ROM (WinCE 6.0 BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets)
One Serial cable (IDC10-to-DB9)
One 12V@2A Power adapter
One USB cable
One Cross Ethernet cable
Contact Boardcon
Any inquiry about the Kit or Android and order the Kit,please do not hesitate to contact Boardcon at:
Market@armdesigner.com or Tel:+86-755-26481393. Your will get our answer in 24 hours.
|
